How to use full size patterns one of two types of patterns may be furnished with your plans and patterns package; one type is printed or blueprinted while the other type is drawn out from master templates on heavy kraft paper. on smaller boats, the blueprinted patterns may have both the inner and outer contour given,. Before copiers, i used tracing paper and either rubber cement or 3m-77. if you aren't sure the copier you're using prints at 1:1 scale, match it to parts or copy a pair of rulers. for my own plans, i print out extra copies of templates and use a glue stick to hold the paper to the wood.. Re: best way to transfer full size drawings to wood? originally posted by robert666 tape the paper in place on the timber and then use a sail needle or similar to poke through the paper onto the timber. you might want to use a copy of the plans rather than the originals..
The way i did it, i used the tracing paper doubled up, back to back. then as i drew my parts, i got lines on my wood parts, and the back of the plans at the same time, then just flip over the plans for the mirror image.. Tape the tracing paper shapes to pieces of poster board. cut the shapes out about 1/2 in. but don't cover the pencil lines with tape. use a center punch to transfer the hole locations to the poster board.. Procedure. the draughtsman who wants to draw and calculate a ship’s frame plan proceeds as follows: the draughtsman draws a grid of vertical lines and horizontal watermark lines on a sheet of tracing paper..
0 komentar:
Posting Komentar
Catatan: Hanya anggota dari blog ini yang dapat mengirim komentar.